SUB SURFACE PL-2000 CABLE PIPE LOCATOR FAULT TRACER subsurface

Description

Subsurface locator model #PL-2000.
Used as a demo unit
Have two units, the first with closed accessories and the other with open accessories. Last picture will be of the second units accessories.
KEY FEATURES
PL-2000 transmitter has 3.0 watts power output in the Direct Connection mode; allowing locates for much longer distances.
The lightweight, balanced receiver offers four different operating modes “Peak” mode – for the most accurate locates and for depth measurement “Null” mode – for fast, easy tracking (also indicates “left” or “right”) “Dist” mode – for even longer distances – up to 50 percent farther “Sonde” mode – for locating sewer Sondes and measuring their depths. Any 512 Hz/8 kHz will be detected.
Three “active” frequencies at a nominal 0.5 kHz, 8 kHz and 27 kHz, plus two “passive” frequencies – the 50/60 power and radio passive
Select the “Mix” mode at the transmitter and transmit all active frequencies simultaneously in the “Direct Connect” mode
Detects and reports “poor ground” conductivity at the transmitter in Direct Connection
Current measurement in the “Depth” function can verify you are tracing the correct line in congested utilities
“Auto Off” functions in both the transmitter & receiver shut off their operations after a user defined time period of non-use
Padded carrying case
Optional Equipment for PL-2000 Direct Inductive Clamp – Induce signal directly onto target line through insulation, paint, etc. – up to 4″ diameter Sonde (mini-transmitter) – 8 kHz – Flush, push, pull through non-metallic pipe – works with PL-2000 receiver. Traces through sewer pipe, water lines, etc. that are plastic, concrete, vinyl, clay, etc. Self-contained – On/Off toggle switch, indicator LED, lanyard attach loop & threaded to receive plumber’s snake.
TECHNICAL SPECIFICATIONS
Transmitter Size
11.0 in x 9.5 in x 4.1 in (29.9 cm x 24.1 cm x 10.4 cm)
Transmitter Weight
5.5 lbs (2.5 kg)
Transmitter Input Power
DC 12 volts (Eight (8) "D" size batteries or external 12v battery)
Transmitter Battery Life
≈ 20 Hours Typical(Alkaline)
≈ 8 Hours at Max Power
Transmitter Operating Temperature
14° to 122° F (-10° to 50° C)
Transmitter Frequency
26.725 kHz, 8.125 kHz, and 512 Hz
Transmitter Output Power
0.5 watts Inductive mode
3.0 watts Direct mode
Transmitter Transmitting Mode
Continuous Wave (non-modulating)
Transmitter Antenna
Single-Coil
Transmitter Depth Accuracy
Up to 16 Feet
Transmitter Warranty
3 Years
Receiver Size
5.2 in x 11.0 in x 24.0 in (13.2 cm x 27.9 cm x 61.0 cm)
Receiver Weight
4.4 lbs (2.0 kg)
Receiver Power Supply
DC 9 Volts (six (6) "AA" batteries)
Receiver Battery Life
≈ 8 Hours Continuous (Alkaline)
Receiver Operating Temperature
14° to 122° F (-10° to 50° C)
Receiver Frequency Display
26.725 kHz, 8.125 kHz or .512 Hz
"Radio" Mode: 15 kHz – 25 kHz
"Live Cable" Mode: 50/60 Hz AC
Receiver Operating Modes
"Peak", "Null", "Dist", and "Sonde"
Receiver Sensitivity
0 to 40