Oil Filter Wrench Cap Removal Tool for 1.8L Toyota Corolla Prius Scion Matrix

Description

Product Feature:
1. This aluminum cup 6 slot oil filter wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine that uses the newer cartridge style oil filter system, while it does not fit the vehicles that use disposable spin-on style oil filters.
2. This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight oil filter caps for Toyota ; built to last and won't crack easily.
3. The surface of this oil filter wrench for lexus is treated with high quality black anodized finish to prevent corrosion.
Oil Filter Wrench Cap Removal Tool for 1.8L Toyota Corolla Prius Scion Matrix
Product Feature:
1. This aluminum cup 6 slot oil filter wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine that uses the newer cartridge style oil filter system, while it does not fit the vehicles that use disposable spin-on style oil filters.
2. This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight oil filter caps for Toyota ; built to last and won't crack easily.
3. The surface of this oil filter wrench for lexus is treated with high quality black anodized finish to prevent corrosion.
4. There are 6 slots on the bottom edge for toyota oil filter wrench, which are mated perfectly with the tabs for Toyota 1562037010/Match for Dorman 917-039/19185631 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
Product description:
Color:
Silver
Oil filter wrench provides maximum torque with multiple contact points and won't break or damage fragile Toyota plastic filter cartridges.
Allow easy removal
Designed for maximum torque
High strength forged alloy, Sand blasted non-slip finish
24mm x 64.5 mm with 14 fultes for a snug no-play, no-slip fit
The Caldera 64.5mm Oil Filter Cap Wrench is compatible with 1.8L, 4-cylinder Toyota, Lexus, and Scion engines which have cartridge style oil filter housings. This wrench was created with 14 flutes and multiple contact points to allow easy removal of the cartridge filter housing on compatible vehicles. This oil filter socket is crafted with cast aluminum and will fit a 3/8-inch square drive, or a 27mm hex drive. Be aware, this wrench is not designed for 2.5L or 5.7L engines, and it will not fit all years and models. This oil filter socket is primarily for cartridge style oil filter caps, and not for typical, disposable spin-off oil filters.
Most of Toyota 4 Cylinder (1800CC - 2000CC)
.Special designed for plastic oil filter cap of TOYOTA/LEXUS
.Suitable for Toyota - Allion, Auris, Corolla axio, Corolla fielder, Corolla rumion, Isis ist, Noah, Premio, Prius, Voxy, Wish
Most of Toyota 4 Cylinder (1800CC - 2000CC)  2009-2015 Corolla
Matrix 2009-2015
Prius  2007-2015
Rav4 2010-2015
Lexus CT200h 2008-2015
Scion XD 1.8L 2008-2015
Scion TC 2005-2015
1990-2015 Camry 4 cyl, V6 (2007-2008)
Avalon (2005-2008)
Highlander 4 cyl (2001-2008) V6 (2008)
Tundra (2007-2008)
Sienna (2007-2014)
Package Details:
1 *
Oil Filter Wrench
Item Specifics
Head Style
Hex
Square Drive Size
3/8"
Manufacturer Part Number
Does Not Apply
Brand
CTY-Auto
Fitment Type
Performance/Custom
Warranty
1 Year
Color
Silver
Type
Oil Filter Wrench
Model
For Toyota Corolla, Prius, Matrix, Lexus CT200h, Scion xD, iQ
Number of Pieces
1
Set or Single Item
Single Item
Hex Drive Socket Size
27mm / 1.06"
Finish
Alloy
Payment
We accept payment visa payonner, paypal, credit card, debit card and many other mothods.
Shipping
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Body Mount Bushing Kit
KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2/4WD
USD 121.67
KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2/4WD
USD 111.60
Body Mount Bushing Kit for Ford F250 F350 1999-2017 Polyurethane Body Mounts
USD 42.99
Polyurethane Body Mount KF04050BK Bushing Kit for 1999-2017 Ford F250 F350 2/4WD
USD 65.99
7-141 Body Cab Mount Bushing Kit For Chevy Silverado 1999-2014 & Sierra 2WD/4WD
USD 79.99
KF04050BK Body Mount Bushing Kit for Ford F250 F350 1999-2017 2/4WD Polyurethane
USD 70.33
Motor Accessories
Volvo & Mack Flywheel Turning Tool 88800014 for D11 D13 D16 MP7 MP8 MP10 Engines
USD 26.98
AHHON1419 Serpentine Belt Wrench Tensioner Tool for Honda Acura 2004-2007 CR-V
USD 35.99
Transmission Pto Fast Cooler Manual Trans for GM Dodge NV4500 NV5600 ZF Ford
USD 94.13
For Mercruiser Alpha 1 Gen 1 Sterndrives Transom Bellows Kit Lower Shift Cable
USD 108.99
3406 Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3406 3408 C-15
USD 349.99
Rear Seal Wear Sleeve Installer Remover Tool 3164780 for Cummins ISX15 ISX12 QSX
USD 175.99
1068 Front+ Rear Braided Brake Lines For ATV Polaris RZR 800/S 800/4 800/XP 900
USD 39.99
Rocker Arm Retainer Clip W302193 For 2003-2010 Ford 6.0L Powerstroke Diesel
USD 25.90
6682 Camshaft Holding Tool Timing Cam Tension Set For Ford 3.5L 3.7L 4V Engine
USD 35.89
Axle Shaft Oil Seal Installer Tool Wheel Knuckle for 2005-2021 Ford F-250/350
USD 71.55
For 1999-2004 Ford Mustang ABS Black Side Window Louvers Scoop Cover Vent 2Pcs
USD 39.89
7040 Diesel Piston Ring Compressor Tool 5.4" Bore For Cummins ISX, CAT 3400 C-15
USD 166.45
Hot Item
Front & Rear Wheel Bearing Greaser Service Tool For Can-Am 25-1516 293350040
USD 13.40
For Dodge Cummins Turbo Adjustable Boost Elbow Controller HX35W HX40W HY35W
USD 12.90
Powerstroke Fuel Pressure Test Fitting Adapter For 6.0L Ford Diesel 2003-2010
USD 14.29
Engine Valve Cover Gasket Set for GMC Chevy Silverado 4.8L 5.3L 6.0L 6.2L 7.0L
USD 17.39
Steel Oil Filter Wrench 86mm 16 Flutes Remover Cap Tool for 2006 -2020 BMW Volvo
USD 13.99
Excellent Delivery
Recommend
10Pcs/Set Front& Rear Wheels Fender Flares Cover for Jeep Compass 2011-2018
USD 125.99
7402 Universal Outside Thread Chaser for External Repair Tool 1-1/4” to 5” O.D
USD 49.69
HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit For Seastar Teleflex
USD 35.99
115225FS Seal Kit Outboard Trim/Tilt Cap & Trim/Tilt Pin Wrench MT0006 MT0009
USD 102.00
Diesel Injector Seat & Bore Cleaning Brush Kit 8090S Premium Stainless Steel
USD 104.99
22 Pcs PDR Tools Push Rods Spring Steel Kit Paintless Dent Repair Removal Tool
USD 89.39
Outdoor Generator Waterproof Cover For Honda Generator EU2200i EU2000i
USD 18.59
JDG476 JDG478 Crankshaft Rear Main Seal Installer For John Deere 7.6L 8.1 ST-198
USD 133.98
7040 Piston Ring Compressor Tool + Anti-Polishing Ring For Cummins ISX 15/QSX 15
USD 293.00
New List Item
66784 Stud Mount Valve Spring Compressor Tool For all 3/8" & 7/16" Rocker Studs
USD 45.39
Silicone Body Mount Bushing Kit for Ford F250 F350 2008-2016 Super Duty Crew Cab
USD 299.99
6708 EN-51097 Injector Retaining Clip Installer & Remover for 2013 And Newer GM
USD 107.98
Cylinder Seal Kit for SeaStar BayStar HC4645H HC4648H HC4658H HP4600 FSM131 Gen2
USD 31.18
3406 B C Fuel Injection Line Kit 6PC 1917941 1917942 1917943 for CAT Caterpillar
USD 159.90
Oil Filter Wrench Cap Removal Tool for 1.8L Toyota Corolla Prius Scion Matrix
Product Feature:
1. This aluminum cup 6 slot oil filter wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine that uses the newer cartridge style oil filter system, while it does not fit the vehicles that use disposable spin-on style oil filters.
2. This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight oil filter caps for Toyota ; built to last and won't crack easily.
3. The surface of this oil filter wrench for lexus is treated with high quality black anodized finish to prevent corrosion.
4. There are 6 slots on the bottom edge for toyota oil filter wrench, which are mated perfectly with the tabs for Toyota 1562037010/Match for Dorman 917-039/19185631 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
Product description:
Color:
Silver
Oil filter wrench provides maximum torque with multiple contact points and won't break or damage fragile Toyota plastic filter cartridges.
Allow easy removal
Designed for maximum torque
High strength forged alloy, Sand blasted non-slip finish
24mm x 64.5 mm with 14 fultes for a snug no-play, no-slip fit
The Caldera 64.5mm Oil Filter Cap Wrench is compatible with 1.8L, 4-cylinder Toyota, Lexus, and Scion engines which have cartridge style oil filter housings. This wrench was created with 14 flutes and multiple contact points to allow easy removal of the cartridge filter housing on compatible vehicles. This oil filter socket is crafted with cast aluminum and will fit a 3/8-inch square drive, or a 27mm hex drive. Be aware, this wrench is not designed for 2.5L or 5.7L engines, and it will not fit all years and models. This oil filter socket is primarily for cartridge style oil filter caps, and not for typical, disposable spin-off oil filters.
Most of Toyota 4 Cylinder (1800CC - 2000CC)
.Special designed for plastic oil filter cap of TOYOTA/LEXUS
.Suitable for Toyota - Allion, Auris, Corolla axio, Corolla fielder, Corolla rumion, Isis ist, Noah, Premio, Prius, Voxy, Wish
Most of Toyota 4 Cylinder (1800CC - 2000CC)  2009-2015 Corolla
Matrix 2009-2015
Prius  2007-2015
Rav4 2010-2015
Lexus CT200h 2008-2015
Scion XD 1.8L 2008-2015
Scion TC 2005-2015
1990-2015 Camry 4 cyl, V6 (2007-2008)
Avalon (2005-2008)
Highlander 4 cyl (2001-2008) V6 (2008)
Tundra (2007-2008)
Sienna (2007-2014)
Package Details:
1 *
Oil Filter Wrench
Payment
We accept payment visa payonner, paypal, credit card, debit card and many other mothods.
Shipping
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
All rights reserved.