KnuKonceptz KNF36 6 Way 1/0 to 4 Gauge Ground Distribution Block

Description

Ebay Product Page
Store
About Us
Frequently Asked Questions
Policies
Shipping
Store Home
Amp Kits
Close Outs
Component Video Cables
Digital / Optical Cables
Distribution / Fuse Blocks
DVI & HDMI Cables
Fuses
Power Wire
RCA Cables
Speaker Wire
Subwoofer Cables
S-Video Cables
Terminals
1/0 Gauge 6 Way Ground Distribution Block
The KNF36x6 is a six way ground distribution block, with a twist
Accepting 0 gauge input and providing two additional 1/0 and three 4 gauge output, makes the KNF36 perfect for high powered installations . Included with this block are three 1/0 compression fitting and three 4 gauge compression fittings. Additional fittings can be purchased to convert the KNF36 to a true six way 1/0 ground block
!
Have a second battery to connect? The KNF-36 can connect two batteries together using its center, dual port input section. With this pass through design, multiple blocks can be linked endlessly.
There are three main configurations for the KNF-36
2 Way Fuse Block with single outputs per circuit.
2 Way Fuse Block with dual outputs per circuit.
6 Way Ground Distribution
The KNF36 uses 3 isolated sections in its
patent pending
design. Each is then linked or fused to configure the block for your application's demands. Each output has room for two links or two Mini-ANL fuses allowing up to 300A of protection per circuit!
Each port on the KNF36 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can be easily be routed through one block!
This item is configured for GROUNDING - Min-ANL Links (buss bars) will be included with this purchase. A fused version is also available. You can also change this block from a ground block to a fuse block later on by replacing the links with fuses.
Overview
- KNF Series Fuse / Distribution Blocks use our compression fittings to secure the input and output cable connections. By changing the fitting type, the installer can select from 1/0 or 4 gauge input or output. This same block is capable of converting into a 2 way fuse block too.
KonFUSED System Introduction
Specifications
Dimensions L x W x H:
2.8" x 4.6" x 1.85"
Total Ports:
6
Fittings Included:
Three 0 Gauge, Three 4 Gauge
Fuse Type:
Mini-ANL (AFC)
Fuse Count:
4 Mini-ANL links come with the KNF36
Max Load:
NA
Finish:
Black Chrome
Product FAQ
How do the Kompression Terminals Work?
Strip the jacket off the cable; Insert the wire into the fitting; fold the copper strands as shown in the photo; Tighten the fitting into the block, compressing the cable into place. This results in 360 degrees of contact area, unlike set screw blocks that have just the one high pressure point. The Kompression Fitting allows more strand/block interaction, which results in less resistance and more current flow.
KonFUSED System Introduction
How can I connect 2 Gauge wire with these terminals?
The 0 Gauge fitting can be used with a 2 gauge cable as well
Can I purchase additional fittings for this model?
Yes, additional fittings are available for purchase under our installation accessories page. They are {{detail_product_description}}.99 each
Additional Images