Fender Brace NOS for 24" Bicycle that has wide tires, like 24 x 2.125

Description

>>
DESCRIPTION:
This is a new brace, but it has been in our storage building for many years and has some rust spots on it.  You can see some of those places in the pictures.    Most of the brace looks OK.  It is silver color steel.
There are 8 pictures above.
For 24" bicycle with wide size tires.
This is for bicycles that have a 24 x 2.125 or similar size tire.  It is NOT  bicycles that have the  narrower  24 x 1 3/8" tire or 24 x 1.75 tires.
It has a center hole for bolting to the fender, and 2 longer slots on each side of the center hole to put a bolt through so the holes that are already in the fender may be used without drilling another hole, even though the holes in the fender are different distances apart.  But, on some bicycles you might have to drill another hole in the fender.
The hole that the wheel axle goes through is about 3/8" wide and 9/16" long.  The distance from the center hole at the top of the brace to the top of the hole the axle goes in is about 13 1/2".  Since the hole the axle goes in is about 1/2" long, then the distance from the center hole at the top to the bottom of the hole for the axle is about 14"
We will send the 2 short bolts that you can see in the first picture.
>>
Shipping:
We
will send this item by First Class Mail within 2 business days after receiving cleared payment. The payment is usually cleared by Paypal immediately upon payment.  If payment is made by e-check we ship as soon as Paypal tells us we may ship.
Usually, the Postal Service delivers within 2 to 5 days after shipment, but sometimes it takes them longer.