Extra Long ATB Bicycle KICKSTAND, goes on REAR FRAME. Greenfield

Description

>>
DESCRIPTION:
This is a NEW  GREENFIELD aluminum alloy kickstand for ATB bicycles. The color is black.   It is in the factory package and has never been on a bicycle.  It mounts on the rear frame of the bicycle.   It clamps onto the seat stay and chain stay part of the bicycle frame near the rear axle.   If the frame of your bicycle is oversize near the rear axle, this kickstand may not fit.
It fits frame diameters up to 18 mm at the top and up to 22 mm at the bottom.  So, measure the diameter of the frame where this kickstand clamps on to be sure your frame tubes are not too large for this kickstand.  The frame tubes diameters of some bicycles are too large for this kickstand to clamp onto.
The weight of this kickstand is about 15 ounces.  It has a wide rubber  foot so it won't sink into the ground so easily.   If it is too long, the aluminum alloy is easy to cut to the right length with a hacksaw.  It does not attach at the rear wheel axle, so it will not interfere with your quick-release lever or with taking the rear wheel off.
There are some bicycles that this kickstand will not fit, so please do not buy the kickstand unless you are sure it will fit your bicycle.   It may be too long or too short for some bicycles - I don't know.  This is the most popular rear kickstand on the market and you can buy this same kickstand from other e-bay sellers.  However, I think most people buy the kickstand that is a little shorter than this.
If you lose the foot, the kickstand will be shorter and may not hold up your bicycle the way you want it and you would have to buy another foot.  I usually DO NOT have an extra rubber foot, and you can probably get one from some other dealer.
The manufacturer says this is a 305 mm kickstand.   When the kickstand is on a bicycle and and none of the kickstand has been cut off, the distance from the underside of the bicycle frame to the flat end of the rubber foot is about 370 mm which is about 14.57 inches.  If that is too long, you would need to cut some of it off.
This kickstand will probably be too long for most ATB and MTN bicycles, but you can cut the end off to make it shorter.   You can put the rubber foot on the end of the kickstand after you cut off some to make it shorter.  Greenfield makes a rear kickstand that is 20 mm shorter than this kickstand and it is priced a little lower.  The video may give someone a better idea of the size bicycles that need this longer kickstand.
Manufacturer's Description:
Rear Mount Kickstand
Stabilizer is great for off-road or mountain bikes. It comes complete with an extra wide rubber foot for superior stability, and won't interfere with pedal action or rear derailleur cables.
This is the stand of choice by law enforcement bike patrols throughout the U.S.  Fits tube sizes up to 7/8" in diameter. Stabilizer also features: Certified Non-Corrosive Casting, Dual Spring Pressure Plate, Snap Action Mechanism, Hardened Steel Pivot Pin, and Calibrated Stem. Weight: about 340 grams
>>
Shipping:
We
will send this item by
First Class Mail
within 2 business days after receiving cleared payment. The payment is usually cleared by Paypal immediately upon payment.  If payment is made by e-check we ship as soon as Paypal tells us we may ship.
Usually, the Postal Service delivers within 2 to 5 days after shipment, but sometimes it takes them longer.