Electrovert Aquastorm 200 In-line Wash (Torrid Zone)

Description

Electrovert Aquastorm 200 In-Line Wash (Loaded!)
Aquastorm Torrid Zone Cleaner
Vintage: 10/2007
Sold "as is".  Option 00:
Fully PM'd / Reconditioning
available. Remove all spray nozzles, descale and replace as needed. Remove the conveyor belt and descale. Clean and descale the complete interior of the machine including the chemical isolation zone. Power up and test all heaters and control circuits. New battery for the PC.  All work to be completed by former Electrovert Technician
Chemical Isolation
Front and rear removable covers
Over spray protection on wet modules
Single point utility connections
Emergency stop controls
Motor overload protection on pumps and blowers
Custom operator keypad and multi-line
LCD display with LED bar graphs
Liquid level tank height sensors displayed on the control panel
Auto fill and drain solenoid valve controls on control panel
20 in. (51 cm) width stainless steel mesh belt
Wash - Dual Hurricane Jet
Rinse Hurricane Upgrade
HEATED RECIRCULATING WASH MODULE
48 in. (122 cm) section
50 gallon (303 liter) sump tank with slanted bottom for efficient draining
Two (2) 16 kW (32 kW tot) Immersion heaters w/ over temperature safety circuits CHEMICAL ISOLATION (DRAG-OUT) MODULE
Chem ISO Level 4
36 in. (91 cm) dwell zone
HEATED RECIRCULATING RINSE MODULE
48 in. (122 cm) section
Four (4) upper and lower stainless steel spray bars
50 gallon (189 liter) sump tank with slanted bottom for efficient draining
FINAL RINSE MODULE 17 in. (43 cm) section
HEATED RECIRCULATING RINSE MODULE 17 in. (43 cm) section
Two (2) upper and lower stainless steel spray bars with staggered nozzles
Upper and lower stainless steel manifold control valves
DRYER MODULES
Two (2) thermocouple sensors temperature monitors with LCD readout
Blower Drying Station #1 30 in. (76 cm) section Two (2) stainless steel adjustable upper airknives
One (1) stainless steel fixed lower airknife
7.5 HP high velocity/high volume centrifugal blower
Blower Drying Station #2
30 in. (76 cm) section
Two (2) stainless steel adjustable upper airknives
One (1) stainless steel fixed lower airknife
7.5 HP high velocity/high volume centrifugal blower
CONVEYOR OPTIONS INCLUDED
Angle adjustable input conveyor 30 in. (76 cm)
Exit end extension 16 in. (41 cm)
CHEMICAL ISOLATION OPTION
Chemical Isolation Level 2 - blowers & spray bars